At present, the automobile sales volume has become the main economic share of all countries in the world. China's automobile sales volume has been a big country in the global automobile production and sales. The domestic automobile sales volume continues to grow, and the proportion of China's car ownership in the world is on the rise. At the same time, the quality requirements of automobile are gradually improved

Workers must first sharpen their tools if they want to do good work. Tools are known as "the teeth of the industry" and are one of the key factors that determine production efficiency, production costs and processing quality, and they promote the progress of the industry. Taitian Group has independent research and development of fixed torque hydraulic pulse wrench. The products of 0.2N.m-1000N.m break the international monopoly and are the first in China. It is one of the indispensable and important equipment in modern automobile production.

In the process of grinding, polishing, spraying, assembling and other work links in the production process of the whole vehicle, it is one of the indispensable and important equipment for modern automobile production.

.Taitian's high-end torque control pneumatic tools solve the quality problems caused by automobile assembly to a greater extent. Taitian's air-cut clutch screwdriver has a fast and accurate air-cut clutch, which can achieve stable torque and high-quality tightening. The tool has low noise and vibration, and adopts the optimal ergonomic design, which greatly reduces the operator's fatigue, reduces the damage to the screw head during the tightening process, and increases the tool life.

Constant torque tools have been popularized in developed countries, leading the development direction of intelligent manufacturing and intelligent assembly. Non constant torque tools have been gradually eliminated by the market. Taitian constantly challenges the limits of technology and replaces imports. Its products have high performance ratio and int service life, providing Chinese enterprises with higher quality and more affordable industrial assembly solutions. Building intelligent manufacturing and brand upgrading for enterprises to become a manufacturer with international competitiveness has the following advantages:

1. Workshop mute effect: the noise is 40% lower than that of impact pneumatic wrench, creating a mute workshop, improving occupational disease prevention and improving the comfortable environment of the workshop

2. Improvement of torque accuracy: the torque accuracy of impact wrench is ± 40%, and the torque accuracy of constant torque wrench is ± 5%. The accurate constant torque function realizes high operation accuracy and faster speed

Tightening of

3. Reduce manufacturing cost: the tool can be operated continuously for more than 100000-200000 times, which is 3-6 times the service life of the impact wrench, reducing the replacement frequency and maintenance cost of the production line,

The use cost is close to that of impact wrench

4. Operation skill control: easy to operate, easy to use, automatic tool shutdown control, reduce the unqualified rate of product assembly and reduce the skill requirements for operators

5. Improve production efficiency: the tool is equipped with pre tightening device and automatic torque setting function, which can replace the manual torque wrench, reduce the number of production line operators and improve production efficiency

Yield benefit

6. Reduce labor intensity: the tool generates tiny pulse pressure through the flow of oil. Compared with the impact wrench, the reaction force is negligible and the vibration injury is reduced

Improve operation comfort

With the increasing labor cost in modern factories, pneumatic tools have been widely used in automatic mechanical equipment in modern industry and become the main configuration of some assembly and distribution industrial lines. Industrial automation technology is a kind of technology that uses control theory, instruments, computers and other information technologies to detect, control, optimize, dispatch and control industrial production processes Management and decision-making, comprehensive high technology to increase output, improve quality, reduce consumption and ensure safety, including industrial automation software, hardware and system. As one of the most important technologies in the field of modern manufacturing in the 20th century, industrial automation technology mainly solves the problems of production efficiency and consistency. No matter high-speed mass manufacturing enterprises or enterprises pursuing flexibility, flexibility and customization, they must rely on the application of automation technology. Automation system itself does not directly create benefits, but it plays an obvious role in improving the production process of enterprises.

Under the general trend of global energy conservation and emission reduction, Taitian energy-saving compressor host is widely used in the manufacturing field. It adopts two-stage compression permanent magnet frequency conversion motor, which saves more than 15% energy compared with ordinary single-stage compressor, greatly reduces the power consumption and energy consumption of the factory.

Solution of automatic control centralized oil supply system

1. The system is specially used for filling lubricating oil for passenger cars. It is applicable to single oil product and 4 filling points, which can meet the refueling work of 4 stations.

2. The system is equipped with 1 set of host controller, 1 set of oil transfer pump assembly, 1 set of liquid level monitor, 4 sets of oil pipe winders, 4 refueling guns, 4 sets of switch control valves and 1 set of special fluid

Pipeline system and 1 set of signal line system.

3. The four filling points of the system can carry out quantitative refueling at the same time. When the preset refueling amount is reached, the system will stop automatically.

4. The host controller can dynamically display the working state, automatically record the refueling information, view the single and cumulative refueling volume, refueling station, time, etc. at any time, and print at any time.

5.The host controller has a simple interface, easy operation, and can be connected to a computer for data management.

6. The liquid level monitor configured in the system can monitor the liquid level of oil in real time. When the oil in the oil barrel is too low, the pump will automatically stop and give an alarm.

7.This system can implement quick oil change service, centralized transportation, filling and management in industrial assembly and automobile 4S stores, which greatly facilitates users, saves space, reduces costs, improves work efficiency clean and environmental protection.

Solution of oil depot management of pneumatic lubricating pump warehouse

1. The pneumatic pump is powered by air, which is a safe and clean way of refueling

2. The oil in the oil drum is completely isolated from the air to prevent oxidation and deterioration of the oil

3. The hand-held oil gun can be turned on to get the lubricating oil, which is fast and convenient to get the oil

4. Electronic hand-held quantitative oil gun can be selected to receive lubricating oil accurately

5. Improve warehouse site management